pcs
Item description
Materials:
Bodies: brass, internal parts: brass / stainless steel, seal: NBR

Temperature range:
-10°C to max. +80°C, ambience: max. +65 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, other media on request

Installation position:
With upright magnets

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Optional:
FKM seal (-10°C to max. +130°C) -V, EPDM seal for air and warm water (-10°C to max. +120°C) -EP

Information:
These valves are always supplied with a solenoid coil and a connector plug.
Properties
Ver­sion 2/2-way so­le­noid valve
Con­trol volt­age 230 V AC
func­tion closed (NC) with­out power
Thread G 1"
Seals NBR
Op­er­at­ing pres­sure [bar] 0 - 10
DN [mm] 25
L [mm] 99
Kv value* [l/min] 171
Power con­sump­tion (AC) [VA] 24
Struc­tural shape so­le­noid coil Q
Spare so­le­noid coil MAG Q 230V
Spare mem­brane (seal­ing kit**) NBR ZS 10 MEM N
Spare mem­brane (seal­ing kit**) FKM ZS 10 MEM V
Spare mem­brane (seal­ing kit**) EPDM ZS 10 MEM EP
Media tem­per­a­ture [°C] -10 to +80
Further information on ZS10230V
Weight 1,6 kg / pcs
Customs duty number 84812090
RoHS compliant Yes
Manufacturer EMC
Documents
  • 3D CAD file (volume model) (Only for customers that are logged in) (STP)
  • Data sheet (Print view)
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge
**Spare diaphragm is supplied including all elastomer seals and can be used for subsequently changing the seal material.

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available