HSW-12-AP (540228) handling module

Item number:

OT-FESTO021423

pcs
Properties
Working stroke [mm] 15 to 25
size 12
Max. linear stroke at 90° swivel angle 142/142 mm
Z-stroke [mm] 80 to 100
Dampening CC: Shock absorber, double-sided,
Soft characteristic curve
installation position arbitrary
Construction set up rotary actuator,
Linear guide plus rotating bearing,
Force controlled movement cycle
Position detection For proximity switch
Operating pressure [bar] 4 to 8
Min. cycle time [s] 0,8
Repeatability end positions ±0.02 mm
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]
Information about operating and control medium Oiled operation possible (required in further operations)
ambient temperature [°C] 0 to 60
Max. torque Mx [Nm] 1,5
Max. torque My [Nm] 1,5
Max. torque Mz [Nm] 1,5
Maximum usage load [KGM] 1,0
Max. process force in Y-direction [N] 35
Theoretical force at 6 bar [N] 35
Product weight [g] 2.840
Fastening type With Throughway bore and centring sleeve
Pneumatic connection M5
Material information Copper and PTFE-free
Stoppers material High-alloyed steel
Spring pressure piece material High-alloyed steel
Base plate material Aluminium wrought alloy,
anodized
Bracket material Aluminium wrought alloy,
anodized
Cross-guide material Quenched and tempered steel
Swivel lever material Case-hardening steel,
Burnished
Backgrounds material Case-hardening steel,
hardened
Sensor rail material Aluminium wrought alloy,
anodized
Bar material Aluminium wrought alloy,
anodized
Positioning screw material High-alloyed steel
Further information on OT-FESTO021423
Weight 2.840 g / pcs
Customs duty number 84798997
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
deliverable again in ⌀ 11 days